Plansifter

SCOPE OF USE:
The plansifter is a machine that plays a very important role in the process of flour production. It is used for the sifting and classifying of grinded grain that grinded in the Roller Mills. The sifting process is arranged according to the milling diagram precisely. It is designed for the maximum possible sifting area in minimum limited spaces.

Special adjustable pressure equipment is used to press the
stack of sieve frames down
Easy to change sieves, easy and simple checking.
Each sieve passage can have two inlets to split the desired
passage into two passages.
The centrifugal force can be adjusted by setting the weights
and this will allow a bigger or smaller turning orbital circle.
They are used in plants with large sieving capacities. The
sifter size will vary according to the capacity required. It is
always possible to get better classification of products and
maintain large capacities by making use of different sieve
configurations.
High sifting capacity can be obtained by using different frame
heights and intermediate frames (spacers). In this way, below
and above sifting paths can be adjusted.
Effective sifting at high capacities. It is possible to
increase 20 % sifting area by using special type sifter boxes.
Each sifting cabin can accommodate up to 28 sieves.
30 sieves in Jumbo types
The access doors are closed by a special pressure-clamping
device provides proper and tight closing
Square shaped sieves having an unchangable
structure, are made of first quality stable wood and are
completely covered with laminated plastic (Formica),
More sifting area possibility by changing the sieve frames
position in right angle
Vertical and horizontal dividing possibility of sifting passages
at any required level
Easy cleaning and maintenance possibility
Internally coated insulation panels to avoid condensation, if
necessary,
A large variety of standard and special sieves enable the
arrangement of many sifting in order to meet any flow sheet demand